PSR-SCP- 24DC/FSP/2X1/1X2

Extract from the online catalog     PSR-SCP- 24DC/FSP/2X1/1X2 Order No.: 2986960 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2986960   Safe coupling relay for SIL3 high and low demand applications, connects digital output signals to the I/O, 2 enabling current paths, 2 signal contacts, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm   Product notes WEEE/RoHS-compliant since: 08/24/2009 Commercial data EAN 4 046356 520911 sales group G501 Pack 1 Pcs. Customs tariff 85364190 Gross weight in pieces 0.19078 KG Net weight per piece 0.1899 KG Catalog page information Page 92 (C-8-2013) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Dimensions Width 17.5 mm Height 99 mm Depth 114.5 mm PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 1 / 6 Aug 13, 2014 PSR-SCP- 24DC/FSP/2X1/1X2 Order No.: 2986960 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2986960 Ambient conditions Ambient temperature (operation) -20 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Max. permissible humidity (storage/transport) ≤ 75 % (Condensation and icing are not permitted based on the average annual temperature) ≤ 85 % (On an individual basis, condensation and icing are not permitted) Input data Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.85 ... 1.1 Typical input current at UN 55 mA Typical inrush current max. 100 mA Typical response time 50 ms Typical release time 50 ms Recovery time 1s Output data Contact type 2 undelayed enabling current paths 1 undelayed confirmation current path Contact material AgCuNi, + 0.2 µm Au Minimum switching voltage 15 V AC/DC Maximum switching voltage 250 V AC/DC Limiting continuous current 5 A (N/O contact) 100 mA (N/C contact) Inrush current, minimum 5 mA Maximum inrush current 5A Sq. Total current 50 A (ITH = I1 + I2 + ... + IN ) Interrupting rating (ohmic load) max. 120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W) 2 2 2 2 2 192 W (48 V DC, τ = 0 ms, N/C contact: 4.8 W) 162 W (60 V DC, τ = 0 ms, N/C contact: 6 W) 66 W (110 V DC, τ = 0 ms, N/C contact: 11 W) 60 W (220 V DC, τ = 0 ms, N/C contact: 22 W) 1250 VA (250 V AC, τ = 0 ms, N/C contact: 25 VA) PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 2 / 6 Aug 13, 2014 PSR-SCP- 24DC/FSP/2X1/1X2 Order No.: 2986960 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2986960 Maximum interrupting rating (inductive load) 72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W) 43 W (48 V DC, τ = 40 ms, N/C contact: 4.8 W) 41 W (60 V DC, τ = 40 ms, N/C contact: 6 W) 35 W (110 V DC, τ = 40 ms, N/C contact: 11 W) 48 W (220 V DC, τ = 40 ms, N/C contact: 22 W) Switching capacity min. 75 mW Output fuse 10 A gL/gG (N/O contact) 6 A gL/gG (N/C contact) General Relay type Electromechanically forcibly guided, dust-proof relay. Mechanical service life Approx. 10 cycles Mounting type DIN rail mounting Degree of protection IP20 Min. degree of protection of inst. location IP54 Mounting position any Category according to EN 13849-1 4 Stop category 0 Designation Air and creepage distances between the power circuits Standards/regulations DIN EN 50178/VDE 0160 Rated surge voltage / insulation 6 kV / Safe isolation, increased insulation Rated insulation voltage 250 V Pollution degree 2 Surge voltage category III 7 Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Stripping length 7 mm Screw thread M3 Connection method Screw connection PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 3 / 6 Aug 13, 2014 PSR-SCP- 24DC/FSP/2X1/1X2 Order No.: 2986960 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2986960 Certificates / Approvals Certification cULus Listed, Functional Safety Certifications applied for: Certification Ex: Drawings Connection diagram Application drawing Example of electrical isolation of a safety PLC output from the field. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 4 / 6 Aug 13, 2014 PSR-SCP- 24DC/FSP/2X1/1X2 Order No.: 2986960 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2986960 Circuit diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 5 / 6 Aug 13, 2014 PSR-SCP- 24DC/FSP/2X1/1X2 Order No.: 2986960 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2986960 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.com © 2014 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 6 / 6 Aug 13, 2014